Standard Tapping Mode AFM Cantilever without Coating
AFM Probe Specifications:
AFM probes of the 160AC series are designed for standard tapping mode AFM imaging in air or vacuum.
The tetrahedral AFM tip is located precisely at the free end of the AFM cantilever. This allows the AFM tip to be positioned accurately over the area of interest on the sample surface.
The uncoated AFM probe offers a sharp AFM tip apex, chemical inertness and a high AFM cantilever Quality factor.
|Shape||Height||Setback||Radius||Half Cone Angle|
|Shape Optimized Positioning||Height 14 µm (12 - 16 µm)*||Setback 0 µm||Radius < 7 nm||Half Cone Angle 0° front, 35° back, <9° side|
* typical values
|Cantilever||Shape||Force Const.||Res. Freq.||Length||Width||Thickness|
|Cantilever Standard tapping mode AFM cantilever||Shape Beam||Force Const. 26 N/m(8 - 57 N/m)*||Res. Freq. 300 kHz(200 - 400 kHz)*||Length 160 µm(1 - 170µm)*||Width 40 µm(38 - 42µm)*||Thickness 4µm(4.5 - 4.5 µm)*|
* typical values#}