none
240AC-NN
Soft Tapping Mode AFM Cantilever without Coating






AFM Probe Specifications:
Coating
Additional Info
AFM probes of the 240AC series are designed for tapping mode AFM imaging of soft samples.
The tetrahedral AFM tip is located precisely at the free end of the AFM cantilever. This allows the AFM tip to be positioned accurately over the area of interest on the sample surface.
The uncoated AFM probe offers a sharp AFM tip apex, chemical inertness and a high AFM cantilever Quality factor.
AFM Tip:
Shape | Height | Setback | Radius | Half Cone Angle |
---|---|---|---|---|
Shape Optimized Positioning | Height 14 µm (12 - 16 µm)* | Setback 0 µm | Radius < 7 nm | Half Cone Angle 0° front, 35° back, <9° side |
* typical values
AFM Cantilever:
Cantilever | Shape | Force Const. | Res. Freq. | Length | Width | Thickness |
---|---|---|---|---|---|---|
Cantilever Soft tapping mode AFM cantilever | Shape Beam | Force Const. 2 N/m(0.6 - 3.9 N/m)* | Res. Freq. 70 kHz(45 - 90 kHz)* | Length 240 µm(1 - 250µm)* | Width 40 µm(38 - 42µm)* | Thickness 2.6µm(2.1 - 3.1 µm)* |
* typical values
#}
-